Cart 0
2.0L TFSI EA113 Forged Rebuild Kit Pistons & Conrods Set
2.0L TFSI EA113 Forged Rebuild Kit Pistons & Conrods Set
2.0L TFSI EA113 Forged Rebuild Kit Pistons & Conrods Set
2.0L TFSI EA113 Forged Rebuild Kit Pistons & Conrods Set
2.0L TFSI EA113 Forged Rebuild Kit Pistons & Conrods Set
2.0L TFSI EA113 Forged Rebuild Kit Pistons & Conrods Set
2.0L TFSI EA113 Forged Rebuild Kit Pistons & Conrods Set

2.0L TFSI EA113 Forged Rebuild Kit Pistons & Conrods Set

Shipping calculated at checkout.

With our 2.0L TFSI set consisting of the high-quality JE forged pistons and our X-Beam connecting rods you get a great combination of stability, performance and safety. And you also save money compared to buying a single one! With this set you can easily bring up to 650 hp on the road.

Suitable for your 2.0L TFSI EA113 engine with toothed belt, the set consists of pistons, connecting rods and racing bearings. The pistons are from the established manufacturer JE Pistons. They are reinforced to withstand extreme loads. An alloy ensures that the pistons are also extremely light. 

Our X-Beam connecting rods are milled from the solid and yet very light (599 grams per rod). Their design ensures a larger cross-section, which in turn distributes the loads over the entire connecting rod. This way you have extremely stable connecting rods that are crack resistant and robust. A great combination for racing enthusiasts! The matching connecting rod bearings come from ACL. Like our connecting rods, they have an additional bore that optimises the lubrication of the piston pins.

JE Pistons piston features:

  • Extremely light due to special alloy
  • Reinforced for maximum performance
  • Standard bore 82.50 mm or 83.00mm
  • 20mm piston pin / CR 9,1:1 or 10,3:1 
  • For 2.0L TFSI with motor type EA113
  • For 144 x 20 mm connecting rods
  • Complete set incl. piston pins, rings and clips
  • Installation and drilling dimensions enclosed

Features of our X-Beam connecting rods:

  • Original BAR-TEK®
  • Milled from the solid material in a high-strength form
  • Suitable for extreme performance increases up to approx. 1000 hp
  • Extremely light and very stable
  • Magnaflux inspected
  • 4 pieces per set
  • With ARP 2000 expansion bolts 3/8"
  • ARP Assembly paste
  • Weight per connecting rod with screws only 599 grams
  • With additional bore for piston pin lubrication

Features of the ACL connecting rod bearings:

  • Racing bearing
  • Coated
  • Extra bore for piston pin

The specified compression is in conjunction with a 0.90 mm cylinder head gasket.

Fitment for: All EA113 TFSI Engines