EQT Typhoon Turbocharger Incl Wastegate - VW/AUDI MQB EA888.3
EQT Typhoon Turbocharger Incl Wastegate - VW/AUDI MQB EA888.3
INTRODUCING OUR LATEST AND GREATEST FLAGSHIP TURBOCHARGER FROM EQT!
The EQT Typhoon includes wastegate installed and calibrated, this turbo is designed for built engine/ high horsepower applications and should not be installed on a stock engine car. This turbocharger is very capable of generating 660whp+ and well into the 550ft-lbs of torque range. While it CAN be installed on a stock engine special care must be taken during the calibration to prevent exceeding factory engine limitations.
**Torque electronically limited to preserve DSG gear set integrity.
The EQT Typhoon turbocharger is a Stock Location replacement turbocharger and features an all new stainless steel turbine housing specifically designed to fit our turbine wheel and also manufactured for fitment with OE and aftermarket downpipes.
The Turbine housing on the Typhoon is provisioned with an oversize internal wastegate port to maintain the factory charge pressure actuator allowing seamless integration and tuning with a stock ECU based system such as Cobb AccessPort and EcuTek ProECU. Special attention was also taken in regards to the wastegate actuator geometry as well as the position and lengths of the arm to ensure optimal control over boost pressure while using an OE actuator.
No special standalone boost controllers are needed for this powerhouse of a turbocharger.
The Compressor Cover on the Typhoon is equipped with a 3" inlet and 1.5" outlet to allow maximum flow through the ported shroud to the 2618 billet compressor wheel which generates a ton of airflow allowing power levels to be pushed upwards of 660whp! It's also provisioned for an OE Diverter valve and mounting bosses for the charge actuator for easy installation of your original hardware, or a new EQT actuator which can be pre-installed and calibrated at EQT before shipment.
During the development phase of the Typhoon, we experimented with many different wheel packages and designs and eventually landed on a custom billet 2618 extended tip compressor wheel measuring 61.4mm on the inducer and 88.3mm at the far edge of the extended tip design.
What you get when purchasing a Typhoon turbocharger from EQT, it will come with a proprietary compressor inlet and outlet hose, as well as application specific oil and coolant lines on both the feed and return.
*Your original lines will not be reused and can stay on your previously installed turbo.
The Typhoon also comes backed by an EQT Warranty as well as an installation kit including all necessary gaskets, seals, etc.
All EA888.3 Powered MQB Vehicles
- Golf GTI
- Golf R
- Jetta GLI
- Audi A3
- Audi S3
Available on back-order only. Ships in 21-30 days
